Welcome!

Welcome to Dream Team's Official Blog!


We are a general contracting firm, serving metro NJ for the last 10 years. Whatever your home needs, big or small, Dream Team will make your dreams come true! We offer free estimates, so call us toll-free at 888-382-2001!

This blog will teach you about services that you might need around your home, especially the things that can endanger your family. We at Dream Team believe that an educated customer is our best customer!
Showing posts with label flue tiles. Show all posts
Showing posts with label flue tiles. Show all posts

9/16/2012

What is a Chimney Inspection?

Some of you out there may have heard your local contractors advertising for a free chimney inspection with a chimney sweep.  Dream Team does, and so do many others - it's a smart idea, and makes sure that your chimney is at its safest at all times.  After all, just last week, you read on this blog about the danger that a sweep can prevent.  Inspections can point out serious safety dangers to your home and your family.

There are three levels of inspection, increasing in severity, as defined by the National Fire Protection Association (NFPA), in their standard titled NFPA 211.  The NFPA divides the types of inspections three categories, or levels.  A Level I inspection is the most basic level of inspection while Level II and Level III inspections are progressively more detailed and comprehensive.

Paraphrasing from that standard and interpretation found online, the levels are pretty much as follows:

Level I
A Level I inspection is the recommended level when an evaluation of the chimney system for continued service is needed and the conditions of use are not changing.  Most likely, unless you're changing an appliance for one of the same type, you're likely to receive a Level I chimney inspection during your annual chimney sweep.  It's limited to the readily available sections of the chimney, accessible connections, and connected appliances.

Your chimney technician does this for several reasons, but the biggest ones are: see that there is no heat-related damage to the chimney or its connected appliances, ensure that the flue is not constricted or blocked in any way (especially by creosote or other buildups), and to ensure that the exterior of the chimney is sound and functioning properly.

Level II
A Level II inspection is more detailed and thorough than a Level I inspection. It's recommended when conditions of use for the appliance or venting system are changing, or when a Level I inspection reveals the need for a more detailed inspection.

A Level II inspection is required when any changes are made to the system, upon the sale or transfer of a property, or after an operation malfunction or external event that is likely to have caused damage to the chimney. Building fires, chimney fires, earthquakes, and severe weather are all indicators that this level of inspection may be needed. A Level II inspection is a more in-depth inspection. 

A Level II inspection includes everything in a Level I inspection, plus the accessible portions of the chimney exterior and interior including attics, crawl spaces and basements. It will also address proper clearances from flammable material in accessible locations.  There are no special tools required to open doors, panels or coverings in performing a Level II inspection. A Level II inspection also includes a visual inspection by video scanning or other means in order to examine the internal surfaces and joints of all flue liners incorporated within the chimney. No removal or destruction of permanently attached portions of the chimney or building structure or finish is needed with a Level II inspection.


Level III 
When a Level I or Level II inspection suggests a hidden hazard and the evaluation cannot be performed without special tools to access concealed areas of the chimney or flue, a Level III inspection is recommended.  A Level III inspection is the most detailed of all of the inspection types and includes inspection of concealed areas of the building. However, examination of concealed areas will be limited to areas reasonably suspected of containing hazards that cannot be evaluated otherwise.  A Level III inspection includes all areas covered in a Level I and Level II inspection, plus an inspection of concealed areas, to investigate known or suspected problems.

A Level III inspection includes all the areas and items checked in a Level I and a Level II inspection, as well as the removal of certain components of the building or chimney where necessary. Removal of components (i.e., chimney crown, interior chimney wall) is needed only when necessary - to gain access to areas that are the subject of the inspection. When serious hazards are suspected, a Level III inspection may well be required to determine the condition of the chimney system. 


It's kind of a dry read, I know.  But by reading through and understanding what it means, you'll learn a little of what your technician needs to do to keep you safe.  After all, you do need a safe home to live in - it's the only kind of home where your family can flourish and a point of pride for you and yours.

9/09/2012

Chimney Fires: Destruction you can Prevent!

This week, we're moving towards the heating season again here in New Jersey and New York, so it's a good time to pay attention to that chimney.  There's still some time left to enjoy the last bits of summer before diving into the fall.  So we decided that this would be a good time to point out something that's probably not been on your mind.  Your home plays host to a fire, every single year - especially if you have a fireplace in your home (or more than one).  It is the ultimate statement of man's authority over Nature - that we can tame her most destructive force and bend it to our will.
 

Unfortunately, like all wild things, fire sometimes strikes back - and when it does, that means danger to your family and (potentially) destruction to your home.  The image to the right is one that no homeowner ever wants to dream of - let alone really see - and that one, thanks to the brave fireman standing beside it (and his crew, obviously out-of-frame), is a (relatively) small fire.  There is no question that chimney fires are extremely dangerous.  The Chimney Safety Institute of America (CSIA) states that in 2007 alone, there were 27,200 chimney-related fires and in those, 20 people died (there are no available reports on injuries).  Those are 20 lives lost that could have - and more importantly, should have been prevented by a simple annual chimney sweep.  There are no statistics on injuries due to chimney fires.


Your local chimney contractor understands these dangers, and the necessity of having a clean chimney.  A clean chimney is the only kind of safe chimney.  While sites like eHow will tell you how to put out a small chimney fire, even they state two very telling things: 

1. An uncontrollable chimney fire is scary and may be disastrous to your home or even life threatening for your family. Taking the proper precautions and steps to extinguish a chimney fire is vital. (emphasis added)
2.The best way to prevent a chimney fire is to have the chimney's soot cleaned out frequently by a chimney sweep and have the fireplace checked prior to and during the months of use. (emphasis added)

Call your local chimney contractor today to schedule a chimney estimate for a sweep - If you live anywhere in New Jersey, or in Westchester or Orange Counties in NY, that's Dream Team.

Now, you may be wondering what a trained chimney sweep is looking for in your chimney.  Here's just a very short list of the most dangerous items:
  • "Puffy" creosote, with rainbow colored streaks, that has expanded beyond creosote's normal form
  • Warped metal of the damper, metal smoke chamber, connector pipe or factory-built metal chimney
  • Cracked or collapsed flue tiles, or tiles with large chunks missing
  • Discolored and distorted rain cap
  • Creosote flakes and pieces found on the roof or ground
  • Roofing material damaged from hot creosote
  • Cracks in exterior masonry
  • Evidence of smoke escaping through mortar joints of masonry or tile liners
Creosote is the residue left after a fire.  Especially common with fireplaces, it often gets left on the inside walls of the chimney flue in a flaky gray ash.  When it becomes puffy, it also becomes extremely flammable - indicating that extreme danger is imminent.  If you have either cracked flue tiles, or smoke escaping, it's very likely you need a chimney liner - which I will discuss at some later time.  A rain cap is simple to fix - but if it, or your damper, is either discolored or distorted due to heat, there is no question but that you have a problem.

In short, there are many warning signs to prevent this danger to your home.  It's a quick and easy process to keep your home and family safe.

Why not call today?